All homes need upkeep, though log home maintenance is a little different than you might expect. Regular maintenance on a cedar log home is different when compared to the required maintenance of a traditional stone or vinyl home, but in a lot of ways the maintenance is much less when you build with Northern White Cedar. With a little planning and a good schedule, maintaining your luxury log home can be a breeze. Here are a few ways to keep your log home strong and beautiful year-round.
It’s wise to perform a visual inspection at least once a year. Depending on the location of your log home, you may be subject to some issues more so than others. Building with Northern White Cedar sets you up for success as you don’t have to worry about treating your log home for pests. The U.S. Forest Service reports that wood decays faster in the southeast and on the northwestern coast than elsewhere due to high rainfall and humid weather so be sure to check each year for any issues that might need to be addressed.
Contrary to popular belief, new cedar log homes need cleaning too, not just older ones. Regular cleaning of the outside of your log home can help decrease the need for repairs later down the line. Plus, if any repairs need to be made it’s best to start with a clean surface that’s free of dirt, pollen, mold, and other grime.
To properly wash the outside of your log home use a mixture of water and wood-friendly detergent. Start at the bottom of an area and gently apply the water/detergent mixture with a long-handled broom, let the soap do the work and don’t aggressively scrub. Work your way from bottom to top and in small sections to be thorough. Once done, use a low-pressure garden hose and rise from top to bottom. It’s recommended to avoid power-washing the logs as it can cause damage to the wood and stain finish.
Every log home needs a good quality stain and a topcoat. How often the process gets redone depends on where the home is located, in addition to yearly wear and tear and even the color or stain you choose. Stains and topcoats should not be applied yearly as a preventative measure; too many layers could result in peeling or chipping. Instead, you should stain and seal your log cabin about every 3 to 5 years.
There are two methods you could use to check if your log home needs a stain or topcoat. The first is to take a look at your home’s exterior after rainfall or after you’ve washed it. Does the water bead away? If so, your home’s exterior is in good shape and doesn’t require a new layer of stain or topcoat. If the water darkens the wood, the previous layer of topcoat is likely gone.
The second method is just as simple, and only requires a piece of masking tape. When your home’s exterior is dry, apply the piece of masking tape to one of the logs. Make sure it’s firmly stuck to the log’s surface, then pull it off. If more than 40% of the piece of tape is covered with the previous layer of stain, then it’s time to restain and reseal.
If you’re on the fence about log homes or if you have more burning questions, give us a call at 814-484-5647 or fill out our contact form here. You’ll be glad you did!